The PROFINET IO interface module, FPNO-21 that is certified according to Conformance Class B (CC-B) supporting PROFIdrives and ABB drives profiles. This module contains the embedded switch for Media Redundancy Protocol (MRP) configuration therefore saving your time and cost to buy and install an extra switch. PROFINET S2 system redundancy is available for ABB Drives via this module, system redundancy is a high-priority demand in process industries or at infrastructure installations where the system must be maintained even during a failure event.

This adapter module is compatible with ABB’s common architecture drives.

• The two ports of FPNO-21 works as an embedded switch that supports Media Redundancy Protocol (MRP) without the requirement to use an external switch.

• The S2 functionality, implemented in FPNO-21, makes it possible for two PROFINET controllers, one primary and one backup, to connect to the ABB Drives.

• Easy to configure name via PLC programming environment as PROFINET station is named by index parameter (i.e. abbdrive-xx)

• Easy to change the drive without special tools to rename the PROFINET station as PROFINET station is named as a part of drive’s backup file.

• PROFINET “drive control” and “PROFIsafe” can be used by separate PLCs through Shared Device support. Shared Device enables accessing one drive from two controllers via one FPNO-21. (i.e.   one PLC to control the drive, other SafetyPLC for safety communication)

• Support PROFIsafe over PROFINET. To use PROFIsafe, FSO-12 or FSO-21 with ACS880 is required.

• Support SNTP protocol for the time synchronization.

• Drive Composer Pro software can be used with FPNO-21 to perform a start-up or maintenance for ABB common architecture drives.

该接口模块,FPOL-21,是根据一致性类别B(CC-B)支持专业和abb驱动配置文件认证的。该模块包含嵌入式媒体冗余协议(MRP)的开关配置,因此可以节省购买和安装额外的开关的时间和成本。通过这个模块可以为ABB驱动器提供普罗菲内特S2系统冗余,系统冗余是流程工业或基础设施安装中的高度优先需求,即使在故障事件中也必须维护该系统。

这个适配器模块与abb的通用架构驱动器兼容。

• fpno-21的两个端口是一个嵌入式交换机,支持媒体冗余协议(MRP),不需要使用外部交换机。

• 在fpno-21中实现的S2功能使两个普罗芬特控制器(一个主控制器和一个备份控制器)能够连接到abb驱动器。

• 易于通过PLC编程环境来配置名称,因为由索引参数(即:)

• 在没有特殊工具的情况下,可以很容易地改变驱动器,从而重新命名普罗菲内特站,因为普罗菲内特站被命名为驱动器备份文件的一部分。

• 通过共享设备支持,普罗菲尼特"驱动控制"和"专业化"可由单独的PLCS使用。共享设备能够通过一个fpno-21从两个控制器访问一个驱动器。(即一个用于控制驱动器,其他用于安全通信的安全控制器)

• 支持专业人士。需要使用FASESAF,FSO12或FSO-21和AC-880。

• 支持信噪比协议的时间同步。

• 驱动器作曲家专业软件可以使用与fpno-21执行启动或维护abb共同架构驱动器。

3AXD50000192724

General Information

• Global Commercial Alias:

  3AXD50000192724
  

• Product ID:

  3AXD50000192724
  

• ABB Type Designation:

  FPNO-21 pack of 20pcs
  

• Catalog Description:

  Two-port PROFINET IO adapter (sold as set of 20pcs) FPNO-21
  

Categories

• Products » Drives » Drive options » Fieldbus options » FPNO - PROFINET IO

Previous ImageNext Image

• 

• 

• 

• 

• 

• 

Next

3AXD50000192724

概要信息

• 全球商业别名:

  3AXD50000192724
  

• 产品ID:

  3AXD50000192724
  

• ABB型号名称:

  FPNO-21 pack of 20pcs
  

• 目录说明:

  Two-port PROFINET IO adapter (sold as set of 20pcs) FPNO-21
  

分类

• 产品 » 传动 » 传+I113:I180动选件 » 通信选件 » FPNO - PROFINET IO

Previous ImageNext Image

• 

• 

• 

• 

• 

• 

Next